Harpic fresh limescale remover
- Usage Instructions&Directions.1. Lift up the toilet seat and carefully direct the nozzle under the toilet rim.2. Squeeze and apply slowly all around the bowl, allowing enough liquid to cover the bowl completely.3. For best results leave for 10 minutes then brush and flush.4. For killing all germs leave for 1 hour then brush and flush.Suitable for all toilet bowls except stainless steel.Use biocides safely. Always read the label and product information before use.CORROSIVE.Precautions.Causes severe burns.Contains hydrochloric acid.Keep locked up and out of the reach of children.Avoid contact with skin and eyes.Keep away from food, drink and animal feeding stuffs.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protection clothing, gloves and eye/face protection.In case of accident or if you feel unwell seek medical advice immediately (show the label where possible).Do not mix with bleach or other cleaning products.If swallowed, rinse mouth with water (only if the person is conscious).After contact with skin, wash immediately with plenty of water.This product and its container must be disposed of in a safe way.Do not allow to come into contact with any surface other than the toilet bowl.
Please note that whilst we take every care to ensure the product information displayed on our website is correct, product recipes are regularly changed and this may affect nutrition and allergen information therefore you should always check product labels and not rely solely on the information presented here.If you require specific advice on any Waitrose branded product, please contact Customer Support on 0800 188884 or email firstname.lastname@example.org. For all other products, please contact the manufacturer.This information is supplied for personal use only. It may not be reproduced in any way whatsoever without the prior consent of Waitrose Limited nor without due acknowledgement.