Preparation and Usage
Pre-Treat Clean & dry the scoop before placing back into tub After pretreat wash as usual Mix 1/4 scoop of powder with 3/4 scoop of water, max 40°C Apply mix on the stain, max 5 min Rub the stain as needed Soak After soaking wash as usual or rinse thoroughly Add x1 scoop to 4L of water 6h Max for Whites For best results on stains, rub before rinsing 1 scoop = 60ml Wash Add with your detergent in the drawer: For normal stains x1/2 scoop For tough & dried-in stains x1 scoop Just add one scoop in every wash Usage Advice: Always follow washing instructions on garment or fabric label. Check for colour fastness by testing a hidden area of the fabric. Rinse and allow to dry. After washing or treating garments with Vanish, dry away from sources of direct heat or direct sunlight. When using Vanish to pre-treat, use lukewarm water. For best results, it may be necessary to repeat part of the process. Do not use on garments requiring dry cleaning. Do not pour the product on any metallic parts of the garments (e.g. buttons, zips). Do not use on any garment or rug made of wool, silk or leather. Do not expose pre-treated or soaked garments to sources of direct heat or direct sunlight before washing or rinsing thoroughly. Do not leave the product to dry on garments (Maximum 5 minutes contact time). Do not expose product to direct sunlight. Do not contaminate the product in the tub. Once mixed, do not leave solution in a sealed container. It will continue to give off oxygen and the container may build up pressure and may leak.