Preparation and Usage
Instructions: - Turn garment inside out or with curtains & drapes, lay flat, underside up. - Iron garment or fabric to crease in hem at required length. (Select suitable heat for fabrics*). - Cut web to required length and place between two sides of fabric to be bonded. Do not allow tape to protrude or have direct contact with iron. - Set iron to a hot temperature and use a low steam setting. Synthetics need special care, do not allow to dry out. - Press iron slowly and firmly over hem for approx. 20 Seconds. Allow to cool for 5 minutes. - Gently test for bond. If required repeat step above until fully bonded. To alter hem: - Follow step 5 and peel apart while hot. - Some adhesive will remain. Care Instructions: - Always test on an inconspicuous area first. - Korbond hemming web is washable and dry-cleanable. - Do not tumble dry *For further details on specific heat timings and guides for this product visit- https://bit.ly/korbondclothescareguidelines
Please note that while we take every care to make sure the product information displayed on our website is correct, product recipes are regularly changed. This may affect nutrition and allergen information therefore you should always check product labels and not rely solely on the information presented here.
If you require specific advice on any Waitrose branded product, please contact our Customer Care Team. For all other products, please contact the manufacturer.
This information is supplied for personal use only. It may not be reproduced in any way whatsoever without the prior consent of Waitrose Limited nor without due acknowledgement.